MFC-2160
Waterproof IP67 Capacitive Fingerprint Sensor with UART/USB & Wide Temp.
Features
- Spatial resolution 508 DPI
- 2D sensor array of 160×160 pixels with waterproof
- Sensing area 8 mm x 8 mm
- SIP package size：12.2mm x 12.2mm x 0.7mm
- Built-in 8-bit ADC for digitizing the image
- The built-in programmable voltage reference
- High-speed SPI interface
- 0.03 sec readout time
- Support 160-byte on-chip data FIFO
- 65Volt ~ 3.6Volt for I/O communication
- Advanced SiP package to reduce the size and provide better water and dust protection
- Windowing function to crop the smaller image
- Finger detection function to detect the finger on the sensor
- Interrupt pin to wake up host when the finger on the sensor at standby mode
- 1mA power consumption at standby mode
- 1uA power consumption at power-down mode
Description
Overview
The MFC-2160 waterproof capacitive fingerprint reader sensor is IP 67 sensor. Based on capacitive-touched technology with a hardened surface and enhanced ESD strength. The built-in analog and digital circuits could minimize the number of external components, and provide an easy-to-use standard SPI interface to microprocessors.
The operation of the MFC-2160 is as following, a fingerprint image captured by the pixel array, delivering fingerprint ridge or valley signals to A/D converter and digital processor, then to the serial peripheral interface for data-reading. The image quality of the MFC-2160 waterproof capacitive fingerprint sensor can be adjusted by setting gain, offset and reference voltage parameters internally. In addition, the internal operations and interface speed can also be configured to meet various finger conditions.
MFC-2160 waterproof capacitive fingerprint sensor also has a finger detection function and windowing function for different applications such as smart card ID, driver license ID, student ID, fingerprint lock, or any handheld devices. This is 100% made in Taiwan and no coronavirus is guaranteed. We also provide the algorithm and better support for custom ROMs.
Fingerprint Recognition Algorithm Support (Optional)
- Good adaptability to dry, wet, or fuzzy fingerprint
- Repair the fractured fingerprints automatically
- Great anti-deformation ability
- Supporting 360 °Authentication
- Self-learning during usage
- Fingerprint Template Size < 1KB
- Verification speed < 700 ms
Comparison
| MFC-2160 | MFC-1160 | MFC-1082 | |
| Sensor | 160*160 Pixel | 160*160 Pixel | 88*62 Pixel |
| Cost/Performance | High-end | Medium | Low cost |
| Algorithm | +MCU (0.75mm) | +MCU (0.75mm) | +MCU |
| Function | parts | parts | parts |
| Application | laptop, tablet, locker, smart card | windows laptop, tablet, locker | laptop, tablet, locker |
Applications
- Biometric authentication on card/Smart Card/Cold Wallet
- Fingerprint Reader/Fingerprint Scanner
- Identification Card/Driver License Card/ID Card
- Personal handheld devices (Mobile/Tablet/Notebook)
- Fingerprint padlock, fingerprint jewelry box, USB fingerprint reader
| Ordering Information | ||
| MFC-2160 | 160*160 pixel waterproof capacitive fingerprint reader sensor with IP67 and wide temp -40C~+70C | |
| MFC-2160 Development Kit | 160*160 pixel waterproof capacitive fingerprint reader sensor development kit including MCU & Algorithm | |
| MFC-2160Q | 160*160 pixel circular capacitive fingerprint sensor with IP67 and wide temp -40C~+70C | |
All product specifications are subject to change without prior notice.
